Home About Us FAQ Contact Us Brands Product Range Public News Room Environment Trade Site Language
Home >  Returning Customers
click here to log in.
 
Public Area
Retailer Locator
Trade Login Only
Brands and Products
Environment

12-BS-03 - Carbon Brushes (Pack of 2)

12-BS-03_full.jpg Carbon Brushes (Pack of 2)

HOLDER: No.
BRUSH INSERT:12.3x4.8x31mm.
BRUSH SLOPE:
TERMINALS: 4.8mm.
MOTOR TYPE: Bosch.
PACK QUANTITY: 2.

Our brushes are made with the grade of carbon that was originally specified by the OEM for the particular application. Why is the grade important? Because the grade chosen is dictated by the speed of the motor; e.g. high speed motors on up-market machines are usually a higher grade.

Nearly all our brushes are laminated. (Some of our competitors are still using block carbon). Why is the lamination important? Because it actually disperses the heat which is created by motor operation, thus preventing arcing and early burn-out.

Our brush holders are always made from flame-retardent plastic. Even if overheating occurs when one of our brushes has been fitted, fire risk is minimized.

Fitting Diagram

12-BS-03.JPG


Related Items:
12-AG-03_thumb.jpg
12-AG-03
 
HOLDER: No.
BRUSH INSERT:12.5x5x36mm.
BRUSH SLOPE:
TERMINALS: 4.8mm.
MOTOR TYPE: AEG.
PACK QUANTITY: 2.

Our brushes are made with the grade of carbon that was originally specified by the OEM for the particular application. Why is the grade important? Because the grade chosen is dictated by the speed of the motor; e.g. high speed motors on up-market machines are usually a higher grade.

Nearly all our brushes are laminated. (Some of our competitors are still using block carbon). Why is the lamination important? Because it actually disperses the heat which is created by motor operation, thus preventing arcing and early burn-out.

Our brush holders are always made from flame-retardent plastic. Even if overheating occurs when one of our brushes has been fitted, fire risk is minimized.


55-se-04_thumb.jpg
55-SE-04  
 
Brush Seater and Commutator Cleaner.
 
INSTRUCTIONS FOR USE: Seating Brushes - with machine running, press down hard on brush with an insulated tool and apply stone at the leading edge of the brush for several seconds, allowing stone material to pass under the brush until the brush is fully seated; Cleaning Commutator - with the machine running, hold stone lightly against the commutator moving the stone slowly back and forth across the commutator face until "excess" film has been removed.
 
SIZE: 1/2" x 1/4" x 5" / 13mm x 7mm x 130mm.
 
IMPORTANT: for best reults, remove oil and grease from commutator before applying the Brush Seater.