This product is manufactured and designed to be compatible or used with appliances of the brand or manufacturer listed above, or for selected commercial/domestic applications.

This is a high quality compatible, alternative product. It is designed to provide you with an alternative working solution to the genuine original equivalent. This alternative choice is reflected in all our compatible parts and accessories offering you a cost saving against the original product. All manufacturers’ names and numbers used for reference purposes only.

Universal products can be used for many makes and models of machine providing it matches the product type and specification. We stock and supply a wide range of universal spare parts, consumables and accessories.

This is an indispensable device for washing machines and dishwashers; preventing a flow of water greater than the one set by the adjustment pointer, avoiding continuous leaking. The water block also has an anti-polluting non-return valve. The device should be installed verticallyfollowing these instructions carefully.Technical Features* Burst Pressure500 N/cm2 * Maximum Static Pressure100 N/cm2 * Maximum Controllable Volumec50litres * Minimum Operating Capacity2litres/min * Maximum Operating Capacity30litres/min * Maximum Water Temperature70OC User Instructions:The water block should be installed between the tap and the supply hose of the household appliance. Using the enclosed plastic key, turn the pointer anti-clockwise to the required settingfor washing machines set the pointer on number8; for dishwashers, set to number4.Cautionfor use on other fixtures, set the pointer to a position suitable for the particular application, considering that each number on the scale corresponds to a controlled volume of approximately 4-6litres.Installation:Manually screw the Water Block to the tap having a suitable thread (3/4" gas), inserting the filter with its convex side facing upwards. The water block will not operate properly if the filter is not installed correctly. If the Water Block is tightened or loosened with the aid of a wrench, the same must be applied to the appropriately octagonally-shaped part of the housing.Screw the supply hose to the lower end of the Water Block. If the supply hose is equipped with a filter, a flat rubber washer must substitute the latter. If the hose has to be tightened or loosened with the aid of a wrench, the same must be applied to the appropriately octagonally-shaped part of the Water Blocks housing so as to hold it firmly whilst performing this operation.If a failure occurs causing a continuous water leak, the Water Block will shut off when the volume of water flowing through equals the amount to which it was previously set with the pointer.To reset the Water Block again after it has shut off; turn the tap off and carry out the necessary repair work. Remove the supply hose from the Water Block and press the coloured plunger, located inside the lower housing of the device itself. It may be difficult to press this plunger if there is high pressure at the inlet side of the water block. In this case; slacken the device from the tapthe plunger can then be pressed with ease.

Paxanpax’s products can help you repair and maintain your appliances and electrical goods. We strive to make repairing appliances a much more sustainable option to disposal, by keeping the prices of spare parts as low as possible.

Through our ‘It’s Right To Repair’ consumer initiative we try to highlight sustainability, efficiency and waste-reduction in domestic and commercial appliances, and to promote the link between repairing appliances and protecting our natural environment with the help of Paxanpax products.

You can learn more about why ‘It’s Right To Repair’ by visiting our sister site here.